Covers for Manufacturing & Distribution Pallets

Standard Wrap Only Goes So Far

A loaded pallet can sit on a dock, ride in a trailer, and wait in a yard for weeks before it reaches the customer. All that time, rain and humidity work into the load, dust settles over the goods, and condensation collects against metal parts and packaging. A shipment that arrives rusted, stained, or damaged turns into returns and warranty claims for the shipper. Transhield builds custom pallet covers to prevent this by keeping each load sealed and protected from the warehouse to the final stop.

Built to Fit the Whole Load

Transhield makes a cover shaped to your exact pallet load, so it seals over the top and down the sides instead of leaving gaps the way generic wrap does. Design one for a recurring load, and your dock crew can fit the same cover on every pallet that ships, keeping protection steady across high-volume runs.

Custom seal over the top and all four sides of the load
Water-resistant shell paired with a breathable, anti-condensation lining
Soft interior that won’t mark cartons, finishes, or bagged goods
Optional VCI additive for pallets carrying metal parts
Forklift slots, vents, zippers, and clear inspection panels as needed
One repeatable cover for every pallet in a high-volume run

TALK WITH TRANSHIELD TODAY

Not sure which cover or protective solution you need? Click on the link and connect with our team of experts.

Why Transhield Works

Water-Resistant Fabrics

Rain, snow, and sleet roll off the outer film rather than soaking into the load, and the cover holds that seal through humid docks and freezing yards alike.

Anti-Condensating

Sealed loads tend to sweat as temperatures swing. The inner layer carries that trapped moisture outward and lets it escape as vapor, so the air around your goods stays dry.

Vapor Corrosion Inhibitor

Add the VCI option for palletized metal parts. A protective vapor settles over the surfaces, cutting corrosion by up to 95% on mixed metals. It uses no nitrites, nitrates, or hazardous materials.

Durable

One cover holds up through repeated handling, long storage, and the bumps of over-the-road and ocean freight.

Soft Inside

The nonwoven inner face sits gently against cartons, painted parts, and Class A surfaces, guarding against scuffs while drawing moisture off the load.

Lightweight

At about 0.20 to 1.25 lbs per square yard, the fabric is easy for one or two dock workers to fit without slowing the line.

Custom Fit

We build each cover to the dimensions of your load and reinforce the corners and edges that take the most abrasion, with openings placed for access or inspection.

Protection from Degradation

A single cover fends off UV rays, rain, snow, sleet, dust, sand, wind, and the airborne grime that collects on freight in transit.

Specs

Fabrics	5 MIL	7 MIL	10.25 MIL
Colors	white	white, tan, blue, green, red	white
Total Thickness	19 MIL	23 MIL	32 MIL
Weight (lbs/yd²)	0.3	0.4	0.6
Lining	nonwoven	nonwoven	nonwoven
Strength Load bearing (lbs) MD/CD average	28	35	50
Expected Life (years)	2	2	2
Shrinkable / Non-Shrinkable	shrinkable	shrinkable	shrinkable
Water Vapor Transmission (g/m²/day)	3	3	1.69

Numbers are subject to change without notice. For information on our patented technologies and products, visit www.transhield-usa.com/resources/patents/

Why VCI

The optional VCI additive releases a corrosion-slowing vapor that settles on bare metal surfaces left exposed under the cover.