Covers for Construction Equipment & Machinery

The Open Yard Takes a Toll

Heavy machinery often spends weeks parked outdoors or strapped to a trailer before it reaches the buyer. For the manufacturers, dealers, and contractors who store and ship it, that open-air exposure adds up: rain feeds rust, UV fades paint, and wind-driven dust grinds into seams and fittings. Equipment that arrives corroded or weathered means reconditioning work and warranty claims. Transhield covers keep each machine clean and protected from the storage lot to the delivery site, so it shows up ready to work.

A Custom Fit for Every Machine

Transhield wraps each machine in a cover cut to its own dimensions, so a loader or light tower gets a tight fit instead of a tarp lashed down with straps. Once we pattern a cover for a model, your crew can fit the same one again and again, protecting every unit the same way as it leaves the yard.

Water-resistant shell keeps rain and runoff off the machine
Anti-condensation lining vents damp air out instead of trapping it
Optional VCI additive slows corrosion on cylinders, pins, and fittings
Heat-shrinks to a tight fit that wind cannot whip loose on the highway
Soft inner layer rides against glass and paint without scratching
Add zippers, flaps, or clear panels for quick access and inspection

Construction Equipment Covered with Blue Cover

TALK WITH TRANSHIELD TODAY

Not sure which cover or protective solution you need? Click on the link and connect with our team of experts.

Why Transhield Works

Water-Resistant Fabrics

Rain, snow, and sleet stay on top of the polyethylene shell and drain away, so none of it reaches the metal underneath. Our fabric performs from coastal humidity to mountain cold.

Anti-Condensating

Warm, damp air trapped under a cover is what rusts a stored machine. The inner layer of our covers wick that moisture to the surface and releases it as vapor, keeping humidity low inside

Vapor Corrosion Inhibitor

Choose the VCI additive, and the enclosed space fills with a corrosion-fighting vapor that can cut rust by up to 95% across different metals. It carries no nitrites, nitrates, or hazardous materials.

Durable

Each cover stands up to years of outdoor service, holding together through sun, storms, and repeated handling on the job.

Soft Inside

The nonwoven inner face is gentle on glass, gauges, and Class A paint, and it also helps pull moisture away from the surface it touches.

Lightweight

Most covers weigh between 0.20 and 1.25 lbs per square yard, light enough for one or two crew members to fit by hand.

Custom Fit

Our design team measures the machine, reinforces the corners and edges that wear first, and adds access points where operators need to reach.

Protection from Degradation

A single cover guards against UV rays, rain, snow, sleet, dust, sand, wind, and airborne pollutants, the steady mix that wears equipment down outdoors.

Specs

Fabrics	5 MIL	7 MIL	10.25 MIL
Colors	white	white, tan, blue, green, red	white
Total Thickness	19 MIL	23 MIL	32 MIL
Weight (lbs/yd²)	0.3	0.4	0.6
Lining	nonwoven	nonwoven	nonwoven
Strength Load bearing (lbs) MD/CD average	28	35	50
Expected Life (years)	2	2	2
Shrinkable / Non-Shrinkable	shrinkable	shrinkable	shrinkable
Water Vapor Transmission (g/m²/day)	3	3	1.69

Numbers are subject to change without notice. For information on our patented technologies and products, visit www.transhield-usa.com/resources/patents/

Why VCI

With the VCI additive in place, our covers have a proven record of slowing corrosion on the metal it seals away.